1p2t solid state rf switch specification sheet jfw model 50S-1841 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com frequency range 500-3000 mhz configuration 1p2t impedance 50 ohms nominal vswr 1.3:1 typical 1.5:1 maximum insertion loss 0.50 db typical 500-1000 mhz 0.75 db maximum 500-1000 mhz 0.60 db typical 1000-2000 mhz 0.90 db maximum 1000-2000 mhz 0.90 db typical 2000-3000 mhz 1.25 db maximum 2000-3000 mhz isolation 75 db typical 500-2000 mhz 65 db minimum 800-2000 mhz 65 db typical 2000-3000 mhz 55 db minimum 2000-3000 mhz switching speed 10 microseconds maximum 6 microseconds typical (50% ttl to 10% or 90% rf) switching transients < 1.0 vpk-pk typical < 2.0 vpk-pk maximum (for any rep rate) rf input power 30 watts average (hot switched) spurious noise (out-of-band) this switch shall produce: < -73dbm (100-500mhz) < -50dbm (1-100mhz) this is to be tested on the common port with j1 and j2 terminated into 50 ohms. control (1 line) ttl "low" common to j1 ttl "high" common to j2 dc supply +15 vdc @ 80 ma nominal and +5 vdc @ 40 ma nominal rf connector bnc, sma, tnc or n female jfw form e-7-f rev f page 1 of 2 --continued--
1p2t solid state rf switch specification sheet jfw model 50S-1841 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com operating temperature range -20oc to +70oc storage temperature range -55oc to +85oc physical size see outline drawing 092-5197 08/14/2009 bac 08/14/2009 ecr/ecn # date rev appr / date ecr/ecn # dat e rev appr / date jfw form e-7-f rev f page 2 of 2
|
